f
Really really good!
This technology is really the standard for today's devices so this is the most acceptable price point for a unit like this. For the amount of outputs that it gives this is wonderful!
I'm using this on 2 pedalboards - Pedaltrain Novo 18 and Classic JR - and it fits perfectly with the brackets (bought separately).
- Stable
- no extra noise
- heats up after extended use like any other PSU
- slim/low profile
- honestly looks good as well
I'm using this on 2 pedalboards - Pedaltrain Novo 18 and Classic JR - and it fits perfectly with the brackets (bought separately).
- Stable
- no extra noise
- heats up after extended use like any other PSU
- slim/low profile
- honestly looks good as well
0
0
Report
K
Bang for your buck Power
I was skeptical at first because of the low price, but after using it in gig situations and seeing that It was reliable and trusted it completely.
It’s flexible in case you have pedals that use more than 9V and for the size it has satisfactory outputs. A sturdy construction with a brushed aluminum finish l. The only downsize is the length of the power chord which could have been quite a bit longer.
It’s flexible in case you have pedals that use more than 9V and for the size it has satisfactory outputs. A sturdy construction with a brushed aluminum finish l. The only downsize is the length of the power chord which could have been quite a bit longer.
2
0
Report
7D
Brilliant product for a great price
Let me start of by sayng that if it isn't made of metal, and if it hasn't got a mains AC input I am not interested. Running a seperate adaptor is rubbish.
So, seeing this after years of using voodoo power supplies, and after never seeing a fender fuel tank in stock, I decided to give this a chance.
And I'm glad I did, it has enough outputs for a medium board (10 pedals) without needing to compromise on chaining two outputs for more power hungry pedals like some digital delays (300-500mA). This has it covered.
Nice slimmer profile (fits better that the voodoo ones, i've mounted this on the thin end of my board underneath and it has plenty clearance to the floor). I am impressed, a great power supply, isolated outputs, good mA rating across them, all for less than 50% of the price of more well known brands.
The only thing that could make it better? having an AC output, as virtually no PSUs cater for stupid stuff like the older digitech whammy pedals and older voodoo switching systems that like AC.
But otherwise, this is great
So, seeing this after years of using voodoo power supplies, and after never seeing a fender fuel tank in stock, I decided to give this a chance.
And I'm glad I did, it has enough outputs for a medium board (10 pedals) without needing to compromise on chaining two outputs for more power hungry pedals like some digital delays (300-500mA). This has it covered.
Nice slimmer profile (fits better that the voodoo ones, i've mounted this on the thin end of my board underneath and it has plenty clearance to the floor). I am impressed, a great power supply, isolated outputs, good mA rating across them, all for less than 50% of the price of more well known brands.
The only thing that could make it better? having an AC output, as virtually no PSUs cater for stupid stuff like the older digitech whammy pedals and older voodoo switching systems that like AC.
But otherwise, this is great
0
0
Report
B
Versatile & Bombproof
Has been on my pedalboard for a couple of years now so the review is time-tested - it has been dragged around pubs and festivals and hasn't missed a beat.
I've used it to run higher power-draw units like the Plethora X5 and Line6 wireless receiver and also higher-voltage pedals up to 18v - it handles these flawlessly and I've been running it at either full or near-to-full capacity.
This one is underneath my board but even if it was on top it holds its own aesthetically aswell - win-win-win!
I've used it to run higher power-draw units like the Plethora X5 and Line6 wireless receiver and also higher-voltage pedals up to 18v - it handles these flawlessly and I've been running it at either full or near-to-full capacity.
This one is underneath my board but even if it was on top it holds its own aesthetically aswell - win-win-win!
0
0
Report
k
Bang for the bucks.
After perfect experiences with Harley Benton PowerPlant ISO-5 Pro I bought this one for my growing pedal board.
I am using it fully loaded and everything works perfectly. I don't observe any sound issues or fizz.
Note: I don't have direct comparison with high end PSUs but as mentioned I didn't observe any issues. Maybe one day when I find out my board is finished I will purchase some top PSU but I don't feel any need to rush.
I am using it fully loaded and everything works perfectly. I don't observe any sound issues or fizz.
Note: I don't have direct comparison with high end PSUs but as mentioned I didn't observe any issues. Maybe one day when I find out my board is finished I will purchase some top PSU but I don't feel any need to rush.
0
0
Report
s
Great value piece of gear
After putting together a board with a few high-draw pedals, I ran into some problems while trying to manage the supply of power. Daisy chaining quickly proved non-viable, and buying enough PSUs to power each pedal individually would cost more than this unit - to say nothing of the hassle involved in trying to find enough wall sockets.
All I wanted from this unit was to be able to power my entire board from one outlet with no side-effects, and it absolutely delivered on that. If you're in the same boat, it's a no-brainer.
All I wanted from this unit was to be able to power my entire board from one outlet with no side-effects, and it absolutely delivered on that. If you're in the same boat, it's a no-brainer.
0
0
Report
G
Quiet and just solid!
Everything about this seems to be great and as advertised and it really delivers low noise power for all my pedals. The only complaint I have is that some of the edges on the enclosure are a little sharp. This isn't really a big concern but I did take a fine sand paper and knocked off the edge just because.. well yeah, you know... Other than that I would wish for the same thing as I always wish for when it comes to anything where DC or USB cables are involved. I wish that the cable was made from some more pliable material and not this plastic stiff crap. This is not specific for the Harley Benton PowerPlant ISO-10AC Pro though. But it is so in this case as well. Now go buy this instead of something much more expensive.
0
0
Report
GP
Built Like a Tank
I love this thing! Stuck it to the underside of my pedalboard with some velcro for a clean look and it is very clean!! The only thing I wish they had was right angle to right angle power cables but that's an easy amazon fix.
Pros:
-the adjustable voltage switches on the ends are great for wireless systems or preamp pedals.
-Plenty of plugs for expand ability and freedom
-Rugged and built like a tank I am not afraid of this ever breaking
Cons:
-it is a chonker so measure well and make sure you have enough clearance
-again, it is also a bit heavier so make sure it is secure or that your velcro is strong enough.
Pros:
-the adjustable voltage switches on the ends are great for wireless systems or preamp pedals.
-Plenty of plugs for expand ability and freedom
-Rugged and built like a tank I am not afraid of this ever breaking
Cons:
-it is a chonker so measure well and make sure you have enough clearance
-again, it is also a bit heavier so make sure it is secure or that your velcro is strong enough.
1
0
Report
E
Noiseless and powerful
Silent operation multiple voltages and tons of power.
0
0
Report
IT
Good upgrade
Got this as an upgrade to the Joyo JP05 - needed a couple more outputs and wanted to run the board via a kettle lead rather than adaptors. Didn't need to modify the pedalboard at all - though larger than the Joyo, it's the same thickness. Noise-wise, no complaints at all. A winner.
0
0
Report