Buy Various Modules at Thomann

Behringer Steps

9

Segment generator, ASR envelope, complex 6-stage envelope, LFO or 4-stage sequence
The grouping of segments is configured using the gate inputs (cable disconnected or connected)
Flexible segment grouping options: Complex 6-stage envelope, six individual envelopes or 3+3, 2+4, etc.

Tiptop Audio Buchla Model 266t

7

Source Of Uncertainty - multi-channel source for analogue random voltages
Two channels for fluctuating random control voltages, each with adjustable rate (0.05Hz - 50Hz) and CV input
One channel for quantised random control voltages (number of states selectable via ...

XAOC Devices Skopje

1

Dual quantiser with two independent channels
High-precision A/D and D/A converters
Both channels can be quantised to different scales

Doepfer A-149-4

5

Digital four-channel random voltage source
Generates 4 triggered and quantised random voltages (range: 0 V to +5 V)
Adjustable octave range

Behringer CP1A

142

Control LEDs for +12 V, -12 V and +5 V.
Slots for 2 Flying Bus Boards with 7 slots each
Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V)

Doepfer A-156 Vintage Edition

21

Vintage edition with black front plate
Converts a continuous input voltage into a stepped output voltage
Eurorack format

Doepfer A-180-9

26

Ideal for connecting multiple systems or housings
Up to 14 signals can be transmitted via common network cables (RJ45)
Width: 2 x 4 HP

Befaco Muxlicer

17

Signal processor with bidirectional switch and gate generator
Consists of the sections step controller, gate generator and analogue switch
Muxlicer can be used as a voltage-controlled signal router (8-on-1 or 1-on-8), ...

XAOC Devices Samara II

6

Utility waveform processor for CV and audio signals
Functions: Mixing, Inverting, Offset Generation, Minimum / Maximum Analysis, Signal Limitation, Signal ...
4 Channels with 2 inputs each

XAOC Devices Jena

2

8-Bit processor for CV and audio signals
Member of the Leibniz subsystem (can be paired with the Drezno module and the Lipsk expander)
15 Banks with 256 wavetables and signal processing functions

4ms Meta Module

7

Multifunctional module that calculates emulations of individual modules, entire patches, sequencers, effect ...
Compatible with the freeware software VCV Rack
Contains 160 pre-installed modules from manufacturers such as 4ms, Befaco, HetrickCV, NonlinearCircuits, ...

4ms Row Power 45

4

Two 16-pin slots for flying bus boards or bus boards
Connectors for CV/gate bus
Two power supply connectors for connecting further Row Power modules or 4ms Pod Eurorack enclosures

Doepfer A-151

55

Electronic 4-position rotary switch
Trigger input
Reset input

Doepfer A-156

58

Quantisation of a tone sequence from the A-155 into a fixed grid (halftones, only major scale, minor scale only)
Quantise the control voltage of a Trautonium manual A-198, Theremin A-178 or ...
Arpeggio-like sound sequences with LFO, Random, Noise, ADSR etc. as input voltage

Shakmat Modular Bard Quartet

10

Programmable 4-channel quantizer
80 Programmable scales per each channel
8 Different scales / harmonies directly accessible via knobs and CV input

NANO Modules VCV Random

2

CV generator for random voltages and trigger signals
Slider with signal LED for the parameters rate, probability, random factor and signal smoothing
CV inputs with bipolar attenuator for all parameters

Joranalogue Audio Design Orbit 3

4

An analogue chaos oscillator
A wide range of applications from LFO / VCO to chaotic modulation source to noise
Frequency control possible with an audio / low switch (range: 2.4 mHz - 22 kHz)

XAOC Devices Drezno II

1

Binary signal processor with AD/DA converter
Generates and processes analog signals in 8-bit
Suitable for CV and audio processing

Tiptop Audio uZeus

34

Two flying bus boards; each with 5 slots
Width of the module: 4 TE / HP
Depth: 36 mm

Erica Synths Pico Quant

9

Compact quantiser module
Storage locations for 8 scales
Web editor available for creating your own scales

vpme.de ZeroScope

32

2-Channel digital oscilloscope, frequency counter and tuner
Single, Dual and X-Y modes
Time axis adjustable from 10 μs - 10 s (10 microseconds to 10 seconds)

Doepfer A-185-2

24

4 CV inputs (1x with controller, 3x without controllers)
Width: 6 TE / HP
Depth: 50 mm

Doepfer A-151 VE

6

Vintage Edition with black front panel
Quad Sequential switch
Electronic, 4-step rotary switch

Doepfer A-196

33

Width: 8 HP
Depth: 40 mm
Power requirement: +40 mA (+ 12V) / -0 mA (-12V)

Expert Sleepers Little Mikey

4

Pre-amplifier for microphones, instruments and line signals
Maximum gain: +60dB
-20 dB pad switchable

Erica Synths Pico RND

16

Generates sine and pulse waves
Random triggers
S & H signals and white noise

Behringer 297 Dual Portamento/CV Util.

21

2 Portamento sections
Each section with signal input / output and adjustable portamento time (10 ms - 3 s) and CV input
Two mixer sections, each with 4 channels, normal and inverted output and mixable fixed voltages (-10 V to +10 V)

Intellijel Designs Scales

15

2-Channel quantizer and sequencer
Quantize any CV signals to a user-programmable tone scale
Quantization can be synchronized via trigger input

Erica Synths Black Joystick 2

14

Joystick with 8 CV outputs - 4 channels, each with output for X and Y axis
2 Gate outputs
Per channel joystick recorder with up to 8 sec. recording time

u-he CVilization

Multi-function module with 4 operating modes
4x4 matrix mixer
Each output is transposable (max. +/-10V) and features a quantiser, sample & hold and glide stage

Joranalogue Audio Design Select 2

5

2-Channel CV processor
Processes CV and audio signals
Per channel: polarisation knob, 2 signal inputs, hold input, select input, unity input and processor output

Frap Tools Sapel

4

Consists of a multi-channel noise source and two random sections
Four output noise generator: blue, white, pink and red or brown noise
The random voltage and clock section features four uncorrelated random CV generation ...

Joranalogue Audio Design Enhance 2

4

Analogue stereo and M/S processor
Controls for balance, stereo base width (0% - 200%), tilt EQ for mid and side band
Peak frequency for both tilt equalisers switchable (250Hz / 1kHz)

Doepfer A-184-1

16

With three functions: Ring modulator, sample & hold/ track & hold, slew limiter
Width: 4 HP
Depth: 40 mm

XAOC Devices Rostock

Binary Data Pipeline
Part of the Leibniz subsystem (can be combined with Drezno and Lipsk)
Shift register/delay line with up to 64 steps

Make Noise Wogglebug

9

Random-voltage generator
Allows all random signals to be synchronised with a clock
Two VCOs, Phase Lock Loop, Lag Processor, Clock, Burst Generator and Sample & Hold

ADDAC 507 Random Bezier Waves

1

Two-channel modulation source for random control voltages
Each channel consists of a random generator that generates smoothed random voltages ...
Parameters per channel: Frequency, Level (VCA), Offset (+/-5V), Curve (form of interpolation) ...

Tiptop Audio uZeus Black

7

2 Flying bus boards with 5 slots each
Width of module: 4 U
Depth: 36 mm

Intellijel Designs MEMS Mic

5

Compact module with integrated microphone (comparable to smartphones, tablets, cameras, etc.)
Neutral sound and wide frequency range (approx. 6–20,000 Hz)
Volume control with CV input

Intellijel Designs Noise Random Tools 1U

16

Useful tools for Eurorack systems
Clock and random pulse source with adjustable rate
Analogue pink and white noise source

ADDAC 508 Swell Physics

2

4-Channel CV-Generator
Simulates orbital movements (water waves) to move 4 virtual buoys on the sea
The distance between the buoys (relation of the CV outputs), swell (minimum/maximum ...

Behringer 921A Oscillator Driver

9

Authentic reproduction of the circuits from the series "Modular 55 & 35"
Controls up to 12 parallel 921B oscillator modules
2 Summed CV inputs for frequency control and 2 summed CV inputs for pulse width modulation

ADDAC 511 VC Stochastic Voltage Gen.

1

Four independent channels, each with clock input, CV output and gate output
Each channel can generate random voltages or envelopes with control over voltage ...
Per channel step sequencer with 32 steps for modulating parameters

Doepfer A-133-2

9

Dual VC Polariser
channel polariser
VCA

Make Noise Jumbler

6-Channel signal mixer and distributor
6 Inputs that can be cross-faded using the rotate button
6 Outputs with LED displays that can be selected steplessly using the rotate knob

Make Noise CH.SVR

6

3-Channel utility module
Channels 1 and 2 with bipolar attenuator for scaling and inverting signals, input and output
Input of channel 1 normalised to +5V

Befaco Burst

5

Voltage controllable burst generator
Generates a sequence of up to 64 trigger pulses that can be ...
All parameters CV controllable

Intellijel Designs Shifty

5

Combination of four S & H stages, sequential gate and sequencer controller
Voice allocate mode: From monophonic melodies pseudo-polyphonic sequences can be generated
Shift Register Mode: To create chords - each newly received gate input ...

Vostok Instruments Trace

Analogue morphing scanner
4-channel crossfader/scanner for audio and CV signals
Scan fader for crossfading and selecting inputs

Joranalogue Audio Design Bias 2

1

2-Channel scaling and offset module for control voltages, audio signals, gates and triggers.
Channel 1 with two inputs, normalisation to +5V, normal output and attenuated output (/2)
Channel 2 with two inputs, normalisation to -5V, normal output and amplified output (x2).

Served with love!

Various Modules